乐仑彩票

济南激光切割加工_山东激光切割加工_济南镀钛_山东不锈钢镀钛

全国服务热线13335166268
0531-88602386
推荐产品
钣金加工-06

人 气:810

铜板铝板切割-01

人 气:417

激光切割加工-02

人 气:4115

您现在的位置:主页 > 乐仑彩票 > 常见问答 >

济南激光切割机的镜片清洗的注意事项

发表时间:2017-07-11 10:03  责任编辑:济南瑞福不锈钢乐仑彩票  点击:

  济南激光切割加工公司分析:激光切割机的镜片清洗的注意事项——激光切割机的镜片要时常清洗,不然会影响切割的效果:

  Ji'nan laser cutting processing company analysis: laser cutting machine lens cleaning notes - laser cutting machine lenses often clean, otherwise it will affect the effect of cutting:

  步用吹气球将原件表面的浮物吹掉,特别是表面有微小颗粒和絮物的镜片,这一步是必要的。但千万不要使用生产线上的压缩空气,因为这些空气中会含有油雾和水滴,这都会加深对镜片的污染。

  The first step is to use the balloon will float off the original surface, especially the surface of micro particles and floc lenses, this step is necessary。 But never use compressed air on the production line, because these air contains oil fog and water droplets, which will deepen the pollution of the lens。

  步应用分析纯丙酮对镜片作轻微清洗。这种级别的丙酮几乎是无水的,这就降低了镜片污染的可能性。棉花球蘸上丙酮必须在光照下清洗镜片,并做环状移动。棉签一但脏了,必须更换。清洗要一次完成以避免产生波筋。

  The second step is the application of pure acetone to make the lens slightly cleaned。 This level of acetone is almost anhydrous, which reduces the possibility of lens contamination。 The cotton ball dipped in acetone must be cleaned with light, and the ring is moved。 Once the swab is dirty, it must be replaced。 The cleaning should be done at once to avoid wave reinforcement。

  如果镜片有两个镀膜表面,如透镜,每个面都需要以这种方法清洗。面需要放在一层干净的透镜纸上以起保护作用。如果丙酮不能将所有的污物去除,接下来使用酸醋清洗。酸醋清洗时是利用对污物的溶解来清除污物的,但不会对光学镜片造成伤害。这种酸醋可以是实验级别的(稀释到50%强度),或者家庭用的含6%乙酸的白醋亦可。清洗的程序与丙酮清洗一样,然后再用丙酮去除酸醋和搽干镜片,这时要频繁的换棉球以完全的吸走酸和水合物。直到清洗干净为止。

  If the lens has two coating surfaces, such as lenses, each surface needs to be cleaned in this way. The first surface needs to be placed on a clean lens paper to protect it. If acetone does not remove all the dirt, then rinse with vinegar. Acid vinegar is used to remove dirt from the dirt to remove dirt, but not to the optical lens damage. This vinegar can be experimental grade (diluted to 50% strength), or the use of vinegar containing 6% acetic acid can also be. The cleaning process is the same as acetone cleaning, and then acetone is used to remove vinegar and dry lens. Then, the cotton balls are frequently replaced to completely absorb acid and hydrate. Until the cleaning is done.

  当污染物和镜片损伤无法通过清洗去除,特别是因金属飞溅和污垢引起的膜层烧坏,要想恢复良好的性能,的办法就是更换镜片。

  The only way to restore good performance is to replace lenses when contaminants and lens damage cannot be removed by cleaning, especially when the film is burned by metal splash and dirt.

同类文章:
  • 济南激光切割加工_山东激光切割加工_济南镀钛_山东不锈钢镀钛_济南不锈钢工程
翡翠棋牌 555棋牌游戏官网 爱乐彩票平台 69棋牌 翡翠棋牌 开元棋牌APP 光明棋牌APP下载 京都棋牌 69棋牌游戏 金陵棋牌