乐仑彩票

济南激光切割加工_山东激光切割加工_济南镀钛_山东不锈钢镀钛

全国服务热线13335166268
0531-88602386
推荐产品
钣金加工-06

人 气:810

铜板铝板切割-01

人 气:417

激光切割加工-02

人 气:4115

您现在的位置:主页 > 乐仑彩票 > 常见问答 >

激光切割加工上会遇到哪些问题?

发表时间:2017-06-27 09:42  责任编辑:济南瑞福不锈钢乐仑彩票  点击:

  对济南激光切割加工这一重要的网站产品,通过前面不断学习,相信大家在这一方面,已经有了的知识积累,即为,已经有了的基础,所以下面,再来进行其的学习工作的话,应该是没有什么困难的。既然如此,那为了节约时间,不如马上来着手进行吧,其具体内容如下。

乐仑彩票   The Ji'nan laser cutting processing of this important website products, constantly learning through the front, we believe that in this respect, have a certain accumulation of knowledge, that is, has a certain foundation, so below, again in the study work, should not have what difficulty. Well, in order to save time, it is better to start at once. The specific content is as follows.

  1、激光切割加工,其对于所有的有机物和无机物,是否都适用?

  1, laser cutting, for all the organic and inorganic substances are applicable?

  激光切割加工,其对大多数的有机物和无机物,都是适用的,而不是指所有的有机物和无机物,所以在这个问题上,其回答是为否,即为,其答案是否定的。因为,在有些金属材料上,激光切割加工不适用。

  Laser cutting processing, the organic and inorganic most, is suitable, but not to all of the organic and inorganic compounds, so on this issue, the answer is not, that is, the answer is no。。 Because, in some metal materials, laser cutting is not applicable。

  2、激光切割加工中,对钣金使用激光切割机进行加工的话,为何会出现烧边或挂渣问题?

  2, the laser cutting process, the use of laser cutting machine sheet metal processing, why the emergence of burning or hanging slag problem?

  激光切割加工中,对钣金使用激光切割机进行加工的话,如果出现烧边或挂渣问题,那么,其的具体原因,是为:当激光切割机切割钣金时,会产生大量的热量,在正常情况下,这些热量会沿着切缝进行扩散,并进行充分冷却。不过,如果热量可扩散的空间比较小的话,那么,其会出现过烧问题,进而,导致烧边或挂渣问题,而且,这在小孔加工中,尤为明显。

  Laser cutting of sheet metal, the use of laser cutting machine, if the burning side or slag, then the specific reasons, is as follows: when cutting metal laser cutting machine, will produce large amounts of heat, under normal circumstances, the heat will diffuse along the slit, and sufficient cooling. However, if the heat diffusion space is relatively small, then there will be overheating problems, which will lead to burning or slag problems, and this is particularly evident in the processing of small holes.

  3、激光切割加工中使用激光切割机的话,那么,激光器的功率大小,与切割厚度,是否有关系?

  3 、 laser cutting machine in the use of laser cutting machine, then, laser power size, and cutting thickness, whether it is related?

  激光切割加工中使用激光切割机的话,那么,激光起的功率大小,是与切割厚度有关系的,所以,在这个问题上,其回答为是。而其具体原因,是为如果激光器功率大,那么,是可以切割厚一点的板材,如果功率较小的话,切割起来比较困难,而且,容易出现各种问题。

  Laser cutting in the use of laser cutting machine, then the laser power from the size of the cutting thickness is related to certain, so in this question, the answer is "yes". The specific reason is that if the laser power is large, then it is possible to cut a bit thick plate, if the power is smaller, it is difficult to cut, but also prone to various problems.

同类文章:
  • 济南激光切割加工_山东激光切割加工_济南镀钛_山东不锈钢镀钛_济南不锈钢工程
天天乐棋牌 爱乐彩票平台 翡翠棋牌官网 555棋牌游戏 69棋牌游戏 555棋牌游戏 456棋牌 555棋牌游戏APP下载 翡翠棋牌官网 金陵棋牌